Perle Systems Perle IOLAN DS1 - Manual (Page 66)

Advanced
66 IOLAN DS1/TS2 User’s Guide, Version 3.4
Adding/Editing Routes
From the Route List tab, if you click the Add or Edit button, you will be able to add a new or edit an
existing route.
Configure the appropriate parameters:
Edit Button Changes an existing route in the Route List.
Delete Button Deletes a route from the Route List.
Type Specify the type of route you want to configure.
Data Options:
z Host—A route defined for accessing a specific host external to your local
network.
z Network—A route defined for accessing a specific network external to
your local network.
z Default—A route which provides general access beyond your local
network.
Default: Default
IP Address When the route Type is defined as Host , this field will contain the IP address of
the host. If the route Type is defined as Network , the network portion of the IP
address must be specified and the Host port of the address will be set to 0.
Example: to access network 10.10.20, the address 10.10.20.0 would be
specified in this field.
Format: IPv4 or IPv6 Address
IPv4 Subnet Mask When the route is a Network route, you must specify the network’s subnet
mask.
IPv6 Subnet Bits If the IP address is IPv6, then you must specify the network’s subnet bits.
Range: 0-128
Host The host that is being used at the route gateway.