Panasonic WJ-NT204 - Manual (Page 74)

75
■ Main Page (without Camera Control)
This page appears when a LEVEL 3 user made access, and the MODE SETUP is set as follows.
MODE SETUP
CAM CONTROL: OTHERS
AUX SYSTEM: NT204
● Random Input Selection Mode
q INPUT SELECT
These buttons are used to switch the images of up to four cameras.
A change of channel by one user causes the channels of the other users connected to the WJ-NT204 to be switched to
that same channel.
w Live image display
Images of the selected camera are displayed on the default page as animated (H.261) /semi-animated (JPEG) pictures.
e Status Display
Alarm information is displayed as “NT204 ALARM 1ch” with input channel number when the transmitter receives a sensor
activation. The latest event will be displayed when more than one event take place. The status information disappears
when the ALARM RESET button is clicked.
q
w
e