Panasonic WJ-NT204 - Manual (Page 59)

59
2. Enter “000” with the numeric button, and press the
ENTER, then press the CALL. The dialog appears.
Another way to start the sequence is to press the one-
touch button that is assigned to “000” the start of the
sequence.
The sequential dialing starts to let the Control site view
the images sequentially. The sequence will skip to the
next when the called site is busy or does not respond
for more than 150 seconds.
3. Press the VIDEO AUTO/MANUAL, (ONE-TOUCH DIAL
4) button when you want to keep viewing the current
site. Press it again to go back to the sequence.
4. Hold down the DIAL button for 2 seconds to terminate
the sequence dialing.
When the inquiry dialog appears, select YES or NO
with the A or B button, then press the ENTER.
YES: Ends the sequence dialing.
NO: Continues the sequence dialing.
■ To Receive a Call
Receiving operation is made manually or automatically fol-
lowing the setup in the 200 RECEIVING REGI. menu.
● Manual Reception
The “RECEIVE A CALL?” dialog appears when there is a
call to the unit. The dialog shows a caller number in either
way: a quick dial number and site name if it is registered, or
simply an IP address if not registered.
1. Press the DIAL button to accept, or the ESC button to
cancel it.
There is another way of operation. Move the cursor to
YES or NO, then press the ENTER button.
When YES is selected, communication starts, then
audio and video is received.
2. Hold down the DIAL to terminate the call.
SEQ. DIALING
QUICK#001 Trans.01 001/005
CONNECTING
DIAL/ESC:QUIT AND DIAL NEXT SITE
CANCEL SEQ. DIAL?
YES NO
←→
:SELECT ENT:EXEC
DIAL:CANCEL ESC:CLEAR
ESC
MENU
AF NEAR FAR TELE WIDE
Remote Controller WV-CU20
1 2 3
4 5 6
7 8
0
9
1 2 3 4 5
#
STEP 1
DIAL
PRESET SET
QUICK
STEP 2 STEP 3
CALL
REDIAL
DELETE
ENTER
AUDIO MUTE
ALM ACK VIDEO SWITCH ONE TOUCH DIAL
AUTO/MANU SITE
RECEIVE A CALL?
NO.001 Trans.01
YES NO
←→
:SELECT ENT:EXEC DIAL:YES ESC:NO
1
2
1