Lexmark 4600MFP - Manual (Page 83)

Settings
83
Using the MFP menus
PCL Emulation Menu
Use these menu items to change printer settings that affect jobs using the PCL emulation printer language. Printing from an
application may override user default settings.
Font Priority Establishes the font search order.
Note: Font Priority only appears
when a formatted flash or hard disk
is installed, is neither defective nor
Read/Write or Write protected, and
Job Buffer Size is not set to 100%. Resident* The MFP searches printer
memory for the requested font
before searching the flash
memory or the hard disk.
Flash/Disk The MFP searches the hard
disk and flash memory for the
requested font before
searching the printer memory.
Menu item Purpose Values and descriptions
Font Source Determines the set of fonts shown in
the Font Name menu item. Resident* Shows all fonts resident in printer
RAM when the MFP ships from the
factory.
Disk Note: Shows all fonts stored on the
MFP hard disk.
Flash Shows all fonts stored in flash
memory.
Download Shows all fonts downloaded to
printer RAM.
All Shows all fonts available to the MFP
from all sources.
Font Name Identifies a specific font from the
specified font source. R0 Courier* The font name and font ID for all
fonts in the selected font source are
shown. The font source abbreviation
is R for resident, F for flash, K for
hard disk, and D for download.
Symbol Set Determines the symbol set for a
specified font name. 10U PC-8 (US)*
(country/region-specific
factory default values) A symbol set is a set of alphabetic
and numeric characters, punctuation,
and special symbols used when
printing with a selected font. Only the
symbol sets supported for the
selected font name are shown.
12U PC-850 (non-US)*
(country/region-specific
factory default values)
Menu item Purpose Values and descriptions