Print settings, Using the mfp menus – Lexmark 4600MFP User Manual

Page 75

Settings

Using the MFP menus

Print Settings

Print settings consist of the following menus. Click any of the menus for more information

Base file name

text entry

The default value is the following word:
image
Note: There is a 53-character limit for the
base file name. The following characters
or symbols are invalid:

* — asterisk
: — colon
? — question mark
< — less than symbol
> — greater than symbol
| — vertical bar

A time stamp is added to the end of the
base file name.

Custom Job
scanning

Allows for scanning of custom scan
to USB jobs.
This is also known as Job Build.
Custom Job is not supported on all
models.

On
Off*

To set to On, select the check box.
To set to Off, clear the check box.

Background
Removal

Adjusts the amount of background
visible on a copy.

-4 to +4 (0*)

-4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.

Contrast

Specifies the contrast used for the
scan to USB job. The default is
dependent on the Content menu
item. If the Content menu item is
reset from the default setting, then
the default for Contrast is reset,
also.

0—5

Text default is 5.
The default is 0 for items other than text.

Shadow Detail

Adjusts the amount of shadow
detail visible on a copy.

-4 to +4 (0*)

-4 preserves the least amount of shadow
detail.
+4 preserves the most shadow detail.

Scan edge to
edge

Specifies if the original document is
scanned edge-to-edge prior to
sending the scan to USB job.

Off*
On

Finishing Menu

PCL Emulation Menu

Quality Menu