Lexmark 4600MFP - Manual (Page 100)

Status messages
100
Understanding MFP messages
Standard Bin Full
Bin [x] Full
[bin name] Full
The standard bin is full.
x represents the number of the bin
that is full.
[bin name] specifies a previously
defined name for the bin, such as
Mary’s bin, and it is full. Remove the stack of print media from the standard
output bin or from the specified bin to clear the
message.
Note: These messages appear on the Menu Settings
Page also. See
Menu Settings Page for more
information.
Toner Low The toner cartridge is low on toner.
The Menu Settings Page shows the
level. It takes an unspecified amount
of time for the MFP to read the level
of toner. Until the level is read, the
MFP does not show the message. • The message clears automatically when the cover
or door over the toner cartridge is opened or if the
MFP power is turned off and then on.
• Replace the toner cartridge. If it is not replaced, the
MFP issues the message again when the door or
cover is closed.
Tray [x] Empty x represents the number of the tray.
The tray has no print media installed. 1 Remove the tray. The message clears.
2 Install print media in the tray according to the
User’s Guide.
3 Insert the tray.
Tray [x] Low x specifies the number of the tray
that is low. Load print media into the specified tray to clear the
message.
Tray [x] Missing x represents the number of the tray
missing from the MFP.
The message is on the Menu
Settings Page also. Insert the tray to clear the message.
Waiting The MFP receives a page of data to
print but waits for an End of Job
command, a Form Feed command,
or additional data. Press Stop. Touch Continue to print the contents of
the buffer.
Cancel the current job.
Wait for the message to clear.
Message Meaning Action