Lexmark 4600MFP - Manual (Page 81)

Settings
81
Using the MFP menus
Setup Menu
Use the Setup Menu to configure a variety of MFP features.
Menu item Purpose Values and descriptions
Printer Language Specifies the default printer language
used to communicate data from the
computer to the MFP.
Note: Setting a printer language as the
default does not prevent a software
application from sending print jobs that
use the other language. PCL Emulation*
PS Emulation PCL emulation–Uses a
PCL interpreter for
incoming host
communications.
PostScript emulation–
Uses a PS interpreter for
incoming host
communications.
Resource Save Specifies what the MFP does with
downloaded resources, such as fonts
and macros stored in RAM, if the MFP
receives a job that requires more
memory than is available.
Setting Resource Save to On causes
the MFP to reset and returns the LCD
to the home screen. Off* The MFP retains
downloaded resources only
until memory is needed. It
then deletes those
resources associated with
the inactive printer
language.
On The MFP retains all
downloaded resources for
all printer languages during
language changes and
MFP resets. If the MFP
runs out of memory, 38
Memory Full
appears.
Download Target Specifies the storage location for
downloaded resources.
Storing downloaded resources in flash
memory or on a hard disk is
permanent storage rather than the
temporary storage that RAM provides.
The resources remain in the flash
memory or on the hard disk even when
the MFP is turned off. RAM* All downloaded resources
are automatically stored in
printer memory (RAM).
Flash All downloaded resources
are automatically stored in
flash memory.
Note: Flash appears as a
menu item if a formatted,
nondefective optional flash
memory card that is not
Write or Read/Write
password protected is
installed.
Disk All downloaded resources
are automatically stored on
the hard disk.
Note: Disk appears as a
menu item if the hard disk
is not Write or Read/Write
password protected.
Job Accounting Specifies to store or not store
statistical information about the most
recent print jobs on the hard disk. The
statistics include whether the job
printed with or without errors, the print
time, the job size (in bytes), the
requested media size and type, the
total number of printed pages, and the
number of copies requested.
Note: Job Accounting only appears
when a nondefective hard disk is
installed. Off* The MFP does not store job
statistics on the hard disk.
On The MFP stores job
statistics for the most
recent print jobs.