Lexmark 4600MFP - Manual (Page 118)

Functions disabled transitional messages
118
Understanding MFP messages
Functions disabled transitional messages
294.00 Scanner jam,
remove all originals
from the scanner The scanner detects a jam at the ADF
exit sensor while the scanner is idle.
Job level recovery is active. Remove all original documents from the ADF to
clear the jam. The message clears.
294.00 Scanner jam,
remove jammed originals
from the scanner The scanner detects a jam at the ADF
exit sensor while the scanner is idle.
Page level recovery is active. Remove all original documents from the ADF.
The message clears.
294.01 Scanner jam,
remove all originals
from the scanner The scanner detects a jam at the ADF
exit sensor while the scanner is idle.
Job level recovery is active. Remove all original documents from the ADF to
clear the jam. The message clears.
294.01 Scanner jam,
remove jammed originals
from the scanner The scanner detects a jam at the ADF
exit sensor.
Page level recovery is active. Remove all original documents from the ADF.
The message clears.
298.01 Scanner Missing –
Cable Unplugged The MFP detects after powering on
that the front side scanner cable is
unplugged. 1 Turn the MFP off.
2 Plug the front side scanner cable into its
connector.
3 Turn the MFP on.
298.02 Scanner Missing –
Cable Unplugged The MFP detects after powering on
that the back side scanner cable is
unplugged. 1 Turn the MFP off.
2 Plug the back side scanner cable into its
connector.
3 Turn the MFP on.
Occurrence Message Information
A function is disabled. A user
enters a shortcut for the function. turned off by
system administrator The message appears for 3 seconds,
and then the previous screen appears.
The USB slot on the front of the
control panel is turned off. A user
inserts a USB cable in the slot. USB turned off by system
administrator. The message appears for 3 seconds,
and then the previous screen appears.
Message Meaning Action