Lexmark 4600MFP - Manual (Page 107)

Attendance messages
107
Understanding MFP messages
Load [src] with [size] Occurs when a source is loaded with
an incorrect print media size as
specified in the Paper Menu. Touch Continue. Load the specified source that
is set for the requested size.
Touch
Automatically select media to override
manual requests for Manual Paper and Manual
Env for the rest of the print job. All requests for
additional pages are automatically overridden,
and print media is selected from an automatic
source.
Touch
Cancel Job to cancel the current job if
needed.
Touch
Reset Active Bin to change to another
linked bin.
Load [src] with [type]
[size] Occurs when the MFP requests that a
specific media source be loaded with
a specific type and size as specified
in the Paper Menu, but the current
source contains an incorrect media
size and type. Touch Continue. Load the specified source that
is set for the requested size and type.
Touch
Cancel Job to cancel the current job if
needed.
Touch
Reset Active Bin to change to another
linked bin.
Load Staples A new staple cartridge is needed to
start or continue printing a job
designated for stapling. Touch Continue to clear the message.
Staple action is suspended until a staple
cartridge is loaded in the printer.
Memory full, cannot
print faxes The attempt to print the fax jobs is
automatically canceled. The Fax code
recognizes that the fax job is
canceled and does not delete pages
in the fax job that have not printed.
The Fax code does not attempt to
reprint the fax causing the memory
error until the MFP goes through a
power on reset. Touch Continue to clear the message.
Turn the MFP off and then on to reset it.
Reattach bin [x] The MFP detects that output bin [x] is
missing or installed incorrectly, where
x is the number of the bin. This
message occurs when pages are
formatted when the bin is present, but
before the pages are printed.
Between the formatting and printing
time, the optional bin is removed from
the MFP. • Touch Continue to clear the message and
continue normal operation without using the
specified output bin.
• Turn the MFP off, unplug the power cord from
the wall outlet, reattach the specified bin,
connect the power cord to a properly
grounded outlet, and then restart the MFP.
• Touch Reset Active Bin to change to another
linked set of bins.
Reattach bins [x]–[y] The MFP detects that output bins x—y
are missing or installed incorrectly,
where x and y are the numbers of the
first and last bin in a group. For
instance, if the MFP supported 10
bins, the message would list Bin 1 -
Bin 10 even though all 10 bins are
affected. This message occurs when
pages are formatted when the bin is
present, but before the pages are
printed. Between the formatting and
printing time, the optional bin is
removed from the MFP. • Touch Continue to clear the message and
continue normal operation without using the
specified output bin.
• Turn the MFP off, unplug the power cord from
the wall outlet, reattach the specified bin,
connect the power cord to a properly
grounded outlet, and then restart the MFP.
• Touch Reset Active Bin to change to another
linked set of bins.
Reattach envelope drawer The MFP detected the optional
envelope drawer is missing between
the time the job processes, and when
it prints. Sometime during processing,
the optional envelope drawer is
removed. Touch Cancel Job to clear the message and
continue without using the optional envelope
drawer.
Install the optional envelope drawer.
Message Meaning Action