Lexmark 4600MFP - Manual (Page 124)

124
Index
291.00 Scanner jam, remove jammed originals from
the scanner 117
291.01 Scanner jam, remove all originals from the
scanner 117
291.01 Scanner jam, remove jammed originals from
the scanner 117
291.02 Scanner jam, remove all originals from the
scanner 117
291.02 Scanner jam, remove jammed originals from
the scanner 117
292 Scanner jam, remove all originals from the
scanner 117
292 Scanner jam, remove jammed originals from the
scanner 117
293 Replace all originals if restarting job. 117
293 Replace jammed originals if restarting job. 117
294.00 Scanner jam, remove all originals from the
scanner 118
294.00 Scanner jam, remove jammed originals from
the scanner 118
294.01 Scanner jam, remove all originals from the
scanner 118
294.01 Scanner jam, remove jammed originals from
the scanner 118
298.01 Scanner Missing — Cable Unplugged 118
298.02 Scanner Missing — Cable Unplugged 118
30.yy Invalid refill, change cartridge 109
31.yy Replace defective print cartridge 110
32.yy Replace unsupported print cartridge 110
34 Short paper 110
35 Insufficient memory to support Resource Save
feature 110
37 Insufficient memory to collate job 110
37 Insufficient memory, some held jobs were
deleted 110
38 Memory full 110
39 Complex page, some data may not have
printed 111
42.xy Cartridge region mismatch 111
50 PPDS font error 111
51 Defective flash detected 111
52 Not enough free space in flash memory for
resources 111
53 Unformatted flash detected 112
54 Network [x] software error 112
54 Serial option [x] error 112
54 Standard network software error 112
56 Parallel port [x] disabled 112
56 Serial port [x] disabled 112
56 Standard parallel port disabled 112
56 Standard USB port disabled 112
56 USB port [x] disabled 113
58 Too many trays attached 113
59 Incompatible duplex 113
59 Incompatible envelope feeder 113
59 Incompatible output bin [x] 113
59 Incompatible tray [x] 113
80 Scheduled maintenance advised 113
88 Toner is low 113
Change to 102
Change [src] to [Custom String] 102
Change [src] to [size] 103
Change [src] to [size] [type] 103
Check duplex connection 103
Check tray [x] connection 103
Clean scanner backing strip 103
Clean scanner glass 104
Close door or insert cartridge 104
Close finisher side door 104
Close finisher top cover 104
Fax Memory Full 104
If restarting job, replace originals that have not begun
to exit the scanner. 104
Insert staple cartridge 104
Insert tray [x] 105
Install envelope feeder 105
Install tray [x] 105
Insufficient Memory to Support Scanner
Attachment 105
Load [src] with [Custom String] 106
Load [src] with [Custom Type Name] 106
Load [src] with [size] 107
Load [src] with [type] [size] 107
Load manual feeder with [Custom String] 105
Load manual feeder with [Custom Type Name] 106
Load manual feeder with [size] 106
Load manual feeder with [type] [size] 106
Load Staples 107
Memory full, cannot print faxes 107
Reattach bin [x] 107
Reattach bins [x] - [y] 107
Reattach envelope feeder 107
Remove paper from [linked set bin name] 108
Remove paper from all bins 108
Remove paper from bin [x] 108
Remove paper from standard output bin 108
Replace all originals if restarting job. 108
Replace jammed originals if restarting job. 109
Scan Document Too Long 109
Scanner ADF Cover Open 109
Scanner locked, release lock under scanner 109
Scanner registration successfully completed 109
Unsupported USB device, please remove 109
Unsupported USB hub, please remove 109
cancel jobs messages
Deleting selected job(s) 101
Job cannot be deleted 101
No jobs selected 101
Copy button messages
Insufficient resources. Try again when the system is
idle. 102
System busy, preparing resources for job. 102
System busy, preparing resources for job. Deleting
held job(s). 102