Lexmark 4600MFP - Manual (Page 61)

Settings
61
Using the MFP menus
Fax Receive Settings
Menu item Purpose Values and descriptions
Enable Fax Receive Allows fax jobs to be received by the
MFP.
Yes* Fax jobs can be received.
No Fax jobs cannot be received.
Rings to Answer The MFP rings a set number of times
to indicate an incoming fax job. 1—25 (1*)
Auto Reduction Scales an incoming fax job so it fits the
size of the print media loaded in the
designated fax source. See
Paper
Source as follows for more
information.
On* Scales the incoming fax.
Off Does not scale the incoming fax.
Paper Source Specifies the print media source
selected to supply print media for the
MFP to print an incoming fax. Auto* The print media source is
automatically selected by the MFP.
Tray Tray or the standard tray is the
specified print media source, where
is the number of the tray.
MP Feeder The multipurpose feeder is the
specified print media source.
Tray
(if an optional
drawer is
installed) Tray , which can be any optional
drawer, is the specified print media
source, where is the number of
the tray in the drawer.
Output Bin Specifies the bin that receives the
printed fax once it is printed. *Standard Bin
[list of available
bins] This menu item displays when at least
one optional output bin is installed.
Duplex Sets duplex printing (two-sided
printing) either on or off for incoming
fax jobs.
This menu item appears if an optional
duplex unit is installed or if the MFP
model has an internal duplex unit. On The incoming fax is a duplex job.
Off* The incoming fax is not a duplex job.
Fax Footer Prints the transmission information at
the bottom of each page from a
received fax. On*
Off Select On to print the footer.
Select Off to prevent the footer from
printing.