Lexmark 4600MFP - Manual (Page 68)

Settings
68
Using the MFP menus
Log Output Bin Specifies the output bin that accepts
the printed e-mail log.
The menu item only appears when
one optional output bin is installed. A list of available
output bins is
shown as values,
such as Bin 1,
Bin 2, and so on
based on the
number of bins
installed.
E-mail Bit Depth Enables the Mixed mode to have
smaller file sizes by using 1 bit
images when Color is set to Off. 1 bit*
8 bit
Custom Job scanning Allows for scanning of custom e-
mails.
This is also known as Job Build.
Custom Job is not supported on all
models.
On
Off* To set to On, select the check box.
To set to Off, clear the check box.
Allow Save as
shortcut Allows saving of e-mail addresses as
shortcuts. Yes*
No When it is set to No, the Save as
Shortcut button does not appear on
the E-mail Destination screen.
Background Removal Adjusts the amount of background
visible on a copy.
-4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
e-mail. The default is dependent on
the Content menu item. If the Content
menu item is reset from the default
setting, then the default for Contrast
is reset also. 0—5 Text default is 5.
The default is 0 for items other than
text.
Shadow Detail Adjusts the amount of shadow detail
visible on a copy. -4 to +4 (0*) -4 preserves the least amount of
shadow detail.
+4 preserves the most shadow detail.
Scan edge to edge Specifies if the original document is
scanned edge-to-edge prior to
sending the e-mail. Off*
On
Menu item Purpose Values and descriptions