Lexmark 4600MFP - Manual (Page 109)

Attendance messages
109
Understanding MFP messages
Replace jammed originals
if restarting job. One or more messages that
interrupted a scan job are now
cleared. Replace the original
documents in the scanner to restart
the scan job. Touch Restart job if page level recovery is
active and the job is restartable. The message
clears. A new scan job containing the same
parameters as the previous job starts.
Touch
Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
Touch
Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch
Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch
Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Scan Document Too Long The scan job exceeds the maximum
number of pages. Note: The scanner finishes scanning current
pages in the ADF, but data is lost when the job
cancels itself after reaching the maximum
number of pages.
Touch
Continue to clear the message.
Touch Cancel Job to clear the message if the
job is restartable.
Touch
Restart job if the job is restartable. The
message clears, and a new scan job containing
the same parameters as the previous job starts.
Scanner ADF Cover Open The scanner automatic document
feed cover is open. The message clears when the cover is closed.
Scanner locked, release
lock under scanner The scanner carriage lock is
engaged. Release the lock under the scanner.
Touch
Continue.
Scanner registration
successfully completed Scanner registration is successful. Touch Continue to clear the message.
Unsupported USB device,
please remove The front USB contains a device or
hub that is not recognized. Remove unrecognized hub or device to
continue.
Unsupported USB hub,
please remove A USB hub in the front USB is not
recognized. Remove the unrecognized device to continue
and clear the message.
1565 Emul error, load
emulation option The download emulator contained in
the firmware card does not function
with the MFP firmware.
Note: The MFP automatically clears
the message in 30 seconds and then
disables the download emulator on
the firmware card. For help downloading the correct download
emulator version, contact the place where you
bought your printer.
30.yy Invalid refill,
change cartridge The MFP detects a refilled Lexmark
Cartridge Return Program print
cartridge. Install a new print cartridge to clear the
message.
Message Meaning Action