Lexmark 4600MFP - Manual (Page 54)

Settings
54
Using the MFP menus
Print Page
Borders Specifies if a border is printed
around the edge of the page at
the margins. On* A page border prints when Paper Saver is set to 2 on
1 Portrait, 2 on 1 Landscape, 4 on 1 Portrait, or 4 on 1
Landscape.
Off A page border does not print.
Collate To keep the pages of a print
job stacked in sequence when
making multiple copies of the
job. On* Copies the entire job the number of times specified.
For example, if you set Copies to 2 and have three
pages to copy, the MFP output is page 1, page 2,
page 3, page 1, page 2, page 3.
Off Copies each page of a job the number of times
specified. For example, if you set Copies to 2 and
have three pages to copy, the MFP output is page 1,
page 1, page 2, page 2, page 3, page 3.
Staple Specifies if the stapler is
turned on or off. Off*
1 staple The menu item displays when a finisher with a stapler
is installed.
Original Size Provides a list of possible
scanner sizes to select from to
specify the size of the original
copy document. Letter (8.5 x 11
in.)*
Legal (8.5 x 14
in.)
Executive
(7.25 x 10.5
in.)
Folio (8.5 x 13
in.)
Statement
(5.5x 8.5 in.)
A4 (210 x 297
mm)*
A5 (148 x 210
mm)
JIS-B5 (182 x
257 mm)
Auto Size
Sense
Mixed Sizes (* Denotes a country/region-specific factory default
value.)
Auto Size Sense determines a single size for a job.
When the MFP is unable to determine a size, the user
is prompted to determine the size of the scan window.
A default size needs to be pre-selected on the LCD.
Copy To
Source Provides a list of possible print
media sources to send the
copy job to for printing. Tray 1*
MP Feeder
Tray 2 Tray 2 is not listed as a selection in the values list
unless an optional drawer is installed.
An envelope feeder cannot be a value even if one is
installed.
Transparency
Separators Places a sheet of paper
between transparencies. On*
Off Select On to have sheets placed between
transparencies.
Select Off to not have sheets placed between
transparencies.
Separator
Sheets Places a sheet of paper
between pages, copies, or
jobs based on the value
selected. None*
Between
Copies
Between Jobs
Between
Pages
Separator
Source Provides a list of possible print
media sources where the
separator sheets could be
accessed. Tray 1*
MP Feeder
Tray 2 Tray 2 is not listed as a selection in the values list
unless an optional drawer is installed.
An envelope feeder cannot be a value even if one is
installed.
Menu item Purpose Values and descriptions