Lexmark 4600MFP - Manual (Page 71)

Settings
71
Using the MFP menus
Log Paper
Source To select the print media source to
supply print media for the MFP to
print a log of all sent and received
FTPs. Envelopes do not apply.
Note: This menu item applies to all
scan functions. Tray 1* Tray 1 or the standard tray is the specified
print media source.
MP Feeder The multipurpose feeder is the specified
print media source.
Tray 2 (if an
optional drawer is
installed) Tray 2, which is an optional drawer, is the
specified print media source.
Log Output Bin Specifies the output bin that accepts
the printed FTP log.
The menu item only appears when
one optional output bin is installed. A list of available
output bins is
shown as values,
such as Bin 1, Bin
2, and so on
based on the
number of bins
installed.
FTP Bit Depth Enables the Text/Photo mode to
have smaller file sizes by using 1 bit
images when Color is set to Off. 1 bit*
8 bit
Base file name text entry The default value is the following word:
image
Note: There is a 53-character limit for the
base file name. The following characters
or symbols are invalid:
* — asterisk
: — colon
? — question mark
< — less than symbol
> — greater than symbol
| — vertical bar
A time stamp is added to the end of the
base file name.
Custom Job
scanning Allows for scanning of custom FTP
jobs.
This is also known as Job Build.
Custom Job is not supported on all
models. On
Off* To set to On, select the check box.
To set to Off, clear the check box.
Allow Save as
shortcut Allows saving of FTP addresses as
shortcuts. Yes*
No When it is set to No, the Save as Shortcut
button does not appear on the FTP
Destination screen.
Background
Removal Adjusts the amount of background
visible on a copy. -4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
FTP job. The default is dependent
on the Content menu item. If the
Content menu item is reset from the
default setting, then the default for
Contrast is reset, also. 0—5 Text default is 5.
The default is 0 for items other than text.
Menu item Purpose Values and descriptions