Sun Microsystems Sun Fire V20z - Manual (Page 35)

Chapter 2 Powering On and Configuring the Server 2-11
PCI
Configuration Setup items for configuring the specific PCI device
Slot #1 or Slot #2:
• Option ROM Scan: When disabled, the device is not
bootable but still usable under the operating
system. When enabled, initializes the device
expansion ROM; makes device bootable.
Enabled
• Enable Master: Enables or disables the selected
device as a PCI bus master.
Enabled
• Latency Timer: Minimum guaranteed time slice
allotted for bus master in units of PCI bus clocks.
Options include: 0040h, 0060h, 0080h, 00AOh,
00COh, 00EOh, default, and 0020h.
0040h
Setup items for configuring the Embedded Broadcom
device GBIT 0 or GBIT 1:
• Option ROM Scan: When disabled, the device is not
bootable but still usable under the operating
system. When enabled, initializes device
expansion ROM; makes device bootable.
Enabled
Reserve specific IRQs for use by legacy ISA devices:
• PCI/PNP IRQ Exclusion: Reserves the specified IRQ
for use by legacy ISA devices.
Available
• PCI/PNP UMB Exclusion: Reserves the specified
block of upper memory for use by legacy ISA
devices.
Available
Console
Redirection Additional setup to configure console. Options
include:
• COM port address: If enabled, the console uses a
port on the motherboard. Options include:
Disabled, On-board COM A, On-board COM B.
COM A
• Console connection: Indicates whether the console is
connected directly to the system or through a
modem. Options include: Direct and Modem.
Direct
• Baud rate: Enables the specified baud rate. Options
include: 300, 1200, 2400, 9600, 19.2K, 38.4 K, 57.6K,
115.2 K.
9600
TABLE 2-3 BIOS Advanced Menu (Continued)
Menu Option Description Default