Sun Microsystems Sun Fire V20z - Manual (Page 103)

Appendix C Diagnostics Commands C-5
C.3 diags run tests
C.3.1 Command
Access: Administrators
Description: Submits one or more diagnostic tests for execution.
Command format: diags run tests [ [{ -n | --name} test_name] [{-a|
--all}] [-H | --noheader] [-P | --noprogress] [{-m | --module}
module] [-v | --verbose]
NWSE_InvalidArgument 4 One or more arguments were incorrect or
invalid.
NWSE_NoPermission 6 Not authorized to perform this
operation.
NWSE_MissingArgument 7 Missing argument(s).
Arguments Description
{ -n | --name
test_name }
Specifies the specific test(s) to execute. See
TABLE 3-1 for test_name values. Run diags get
tests for a list of individual test names.
{-a | --all} Specifies that all tests are to be executed. Run
diags get tests
for a list of all available tests.
Specifying no arguments also runs all tests for each
device in the system.
{-H |--noheader} Suppresses header output.
{-P | --noprogress} Suppresses progress dots when waiting for test
results.
{-m | --module
module }
Specifies that only tests for the specified module are
to be executed. See
TABLE 3-1 for module values.
Run diags get tests for a list of modules.
[-v | --verbose] If specified, test details display following the test
result line.
Return Code ID Description