Sun Microsystems Sun Fire V20z - Manual (Page 100)

C-2 Sun Fire V20z Server User Guide • March 2004
C.1 diags cancel tests
C.1.1 Command
Access: Administrators
Description: Cancels one or more diagnostic tests, resulting in the deletion of results
data.
Command format: diags cancel tests [[{ -t | --test} test_handle] [{-
a|--all}] [{-H | --noheader}]]
Specifying no arguments cancels all tests for each device in the system.
C.1.2 Return Codes
Following are the return values for this command:
Arguments Description
{ -t | --test} Specifies the test to cancel. (Note: The test_handle is
the same as the test handle that is output to the
screen when you submit the test.)
{-a | --all} Cancels all tests.
{-H | --noheader} Suppresses header output.
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage,
conflicting options specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced
by the server. RPC procedure timed out
and the request may or may not have
been serviced by the server.