Sun Microsystems Sun Fire V20z - Manual (Page 104)

C-6 Sun Fire V20z Server User Guide • March 2004
The following data displays after a test is run:
■ Submitted Test Name
■ Test Handle
■ Test Result (for example, Passed, Failed)
■ Details (if you specify the -v option, Test Details displays indicating detailed
information about the test such as high, low, and nominal values, actual values,
etc. Upon failure, Failure Details displays with a text message indicating the cause
of failure.)
C.3.2 Return Codes
Following are the return values for this command:
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage,
conflicting options specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced
by the server. RPC procedure timed out
and the request may or may not have
been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.
NWSE_InvalidArgument 4 One or more arguments were incorrect or
invalid.
NWSE_NoPermission 6 Not authorized to perform this
operation.
NWSE_MissingArgument 7 Missing argument(s).