6 installing from cd-rom with cdinst – Siemens Unix V4.0 User Manual
Page 52
Installing Advanced Server for UNIX
Installing from CD-ROM with cdinst
Product Manual
U7613-J-Z815-6-76
©
S
iem
e
n
s
N
ix
dor
f
In
fo
rm
at
io
n
s
s
y
s
te
m
e
A
G
1
9
9
5
P
fad
: D:
\O
7
613
e6
\u
761
3e
.k
04
4.6 Installing from CD-ROM with cdinst
Advanced Server for UNIX is only supplied on CD-ROM. The first steps for installation with
the
cdinst
program are the same for all packages and are thus described here centrally. The
other installation steps for the individual packages are given at the end of this section.
Carry out the following steps in the specified sequence:
1. Log on as system administrator
root
and insert the CD into the drive of the system from
which you want to carry out the installation.
You can initiate the installation procedure from the UNIX command prompt.
2. Start the installation program with
cdinst
. The following dialog box is displayed:
Ê
Place the cursor on
CD-ROM device name
and select the device name for the CD-
ROM drive with
(
CHOICES
). Then select
(
SAVE
) to confirm your
input. A general message about the volume is then displayed.
Ê
Acknowledge with
(
CONTINUE
).
3. Mark the
ASX
set in the displayed list with the cursor and then press
(
MARK
)
and
(
ENTER
). The following message is then displayed:
Ê
Select
info
to display other information on the Advanced Server for UNIX V4.0
product, e.g. the name of the manufacturer, date of manufacture, version etc.
(
CANCEL
) returns you to the displayed selection.
1 Process Multi-Product CD-ROM
Server: local
CD-ROM device name: /dev/ios0/sdisk005s0
Remote pathname/
Local mountpoint: /cdrom0
Fill in the form and then press SAVE.
F2
F3
F8
F2
F3
2
info
pkginfo
README
install
- Display Detailed Product Information
- Display Detailed Information on Packages
- Display README Files
- Install Products
Move the cursor to the item you want and press ENTER to
select it.
F6