1 addclipr – Siemens Unix V4.0 User Manual
Page 131
Configuring Advanced Server for UNIX
Configuration for shared client printer
Product Manual
U7613-J-Z815-6-76
©
S
iem
e
n
s
N
ix
dor
f
In
fo
rm
at
io
n
s
s
y
s
te
m
e
A
G
1
9
9
5
P
fad
: D:
\O
7
613
e6
\u
761
3e
.k
05
5.6.1.1
Addclipr
Purpose:
The addclipr command is used to add an Advanced Server client printer device to the
configured spooler.
Syntax:
addclipr
clientname printername printertype [clienttype [sharename]]
where:
clientname
specifies the network name of the client printer computer to which the
printer is attached.
printername
specifies the printer destination name to be added to the configured
Spooler.
printertype
specifies the printer as being of this type.
The
printertype
is used to extract data from the
terminfo
database.
The parameter must be an entry in the
terminfo
database.
Not all printers are available for Advanced Server for UNIX on some UNIX systems.
If you cannot use the required printer type, enter
standard
.
clienttype
is either CLIPR or PRSRV. The default is CLIPR with a client on which
clispool or clipcach is running. With PRSRV, select any system that can
make the “shared printer” resource available, for example Windows for
Workgroups, Windows 95/98, Windows NT, or a UNIX Server running
Advanced Server for UNIX.
Please note the section “PRSRV option guidelines” below.
The
sharename
has to be entered if the clienttype is PRSRV.
Comments:
The addclipr command configures the Advanced Server and the configured spooler to send
print jobs from the Advanced Server computer using the UNIX spoolin command. It does
not share the printer for network use. To enable network access to the client printer, a
shared printer queue must be created using the
net share
command.
i
i