Siemens Unix V4.0 - Manual (Page 295)

Advanced Server Registry Advanced Server Key Descriptions
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
13
13.5.5 Process Parameters Entries
The Registry path that contains entries for the Advanced Server Process Parameters is as
follows:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
\AdvancedServer\ProcessParameters
CoreOk REG_DWORD 0 or 1
Specifies whether the server can create a core dump file on disastrous failures.
Default: 1 (create core file)
KeepSpareServer REG_DWORD 0 or 1
Specifies whether the server should have a spare lmx.srv process available for another
client. New client connections are likely to be quicker if this key is enabled.
Default: 1 (start lmx.srv process)
LockNapInMSec REG_DWORD 1 - infinity
Specifies the length of time in milliseconds that the server sleeps when shared memory
lock contention occurs. The server retries busy locks at intervals specified in this key
until the length of time specified in the value of the MaxLockTimeInSeconds key
elapses.
Default: 10 milliseconds
MaxLockTimeInSeconds REG_DWORD 5 - infinity
The maximum interval in seconds that a server process waits for a shared memory lock
to become available.
Default: 300 seconds (5 minutes)
MaxVCPerProc REG_DWORD 0 - 101
The maximum number of virtual circuits that each lmx.srv process should be able to
handle. This limit normally is calculated on the fly by Advanced Server using the value
of the VCDistribution Registry key and the value of the maxclients parameter in the
lanman.ini file. If the value of this key is non-zero, its value is used instead of the calcu-
lated value.
Default: 0 (Use value of VCDistribution key)