Siemens pocket 2011 Tango - Manual (Page 67)

Code numbers and factory defaults
58
KAP17A.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Code numbers and factory defaults
Changing the system code, changing the PIN
To protect your personal settings, Gigaset 2011 Tango has
a four-digit system code and an eight-digit handset PIN
(personal identification number). The factory defaults are:
● System code: "0000"
● Handset PIN: "0000"
You need to know the system code in order to create ba-
sic settings or to lock the telephone for outgoing calls.
The PIN primarily protects settings on your handset(s);
it has no effect on the basic functions of the base station.
For security reasons, a new system code and a new PIN
should be entered.
If several handsets are operated (➔ page 52), the same
system code is valid for each one.
Changing the system code
( t means: browse usingx
, confirm using u )
Incorrect entries can be modified. Do do this,
follow the input function rules described from
➔
page 22 onwards.
When entering a new system code or PIN you
must not forget the number entered. Other-
wise intervention in the device is necessary. If
this happens, please contact Siemens.
Z
OK
.t Service
Call up menu item.
#8: Start setting procedure.
o
Enter the current system code (factory default "0000").
o
Enter the new four-digit system code. Note carefully the
number entered.
o
Enter the new system code again to confirm.
x Store the setting.
SET