Siemens pocket 2011 Tango - Manual (Page 62)

Operating in a telephone system
53
KAP16.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Setting the flash time in dual-tone multifrequency signaling (DTMF)
( t means: browse using x
, confirm using u )
Analog trunks
For through connection to the public telephone network
you must set:
● the analog trunk
● the pause length after the analog trunk (if a pause is
necessary after entry of the analog trunk)
If the telephone system is connected as a subsystem to
a main system, you must set the:
● the analog trunk
● the MSI
● the pause length after the analog trunk/MSI
Deleting the analog trunk/MSI
( t means: browse using x
, confirm using u )
Z
OK
.t Service
Call up the "Service" menu item.
#1 Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 58).
u 930x Set a flash time of 80 ms.
or
u 936x Set a flash time of 100 ms (factory default).
or
u 933x Set a flash time of 300 ms.
or
u 934x Set a flash time of 600 ms.
REDIAL SET
REDIAL SET
REDIAL SET
REDIAL SET
For the pause length to be entered after the an-
alog trunk/MSI, please consult the documenta-
tion about your telephone system.
Z
OK
.t Service
Call up the "Service" menu item.
#1 Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 58).
u 2%3 x
Delete analog trunk/MSI
REDIAL SET