Siemens pocket 2011 Tango - Manual (Page 19)

External outgoing calls
10
KAP06.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1100-B301-2-7619
External outgoing calls
Calling external subscribers
You will hear the ring tone.
Dialing with call number checking (en-bloc dialing)
En-bloc dialing allows you to check the external call
number entered before it is dialed and correct it, if neces-
sary, using the display key before the line is seized.
(For instructions on how to edit the call number, "Input
function" ➔ page 22).
( t means: browse usingx
, confirm using u )
The call number is dialed.
You can also leave this additional menu without dialing by
pressing the display key.
c Press the off-hook key. You will hear the dial tone.
o
Enter the desired call number on the dialling keypad. The
number you have entered is shown on the display, e.g.:
:
RUF AUS
INT PAUSE
Extern
123456
The maximum length of call numbers that you
can enter is 22 digits.
X
o
Enter the desired call number. The number you have en-
tered is shown on the display, e.g.:
:
You can correct the number entered using the enter func-
tion.
c
Press the off-hook key within 30 seconds to seize the
line. The call number is dialed. You will then hear the ring
tone.
or
123456
_
WEITER < > X W
Z OK
u t Dial W
{