Siemens pocket 2011 Tango - Manual (Page 17)

Incoming calls
8
KAP05.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Incoming calls
Accepting calls
An incoming call is indicated by the ringer (bell symbol).
You will know that it is an external call when you the fol-
lowing message appears on your handset display
You will know that you are receiving an internal call if you
see the following message on your handset display (the
example shows an incoming call from a second handset):
If the handset is in the charging unit:
If the handset is not in the charging unit:
:
u
You can switch off the ring tone. Calls can be accepted as
long as the call symbol is displayed.
External call
RNG OFF
RNG OFF
:
Internal call 2
RNG OFF
Remove the handset from the charging unit. You are con-
nected.
The automatic acceptance of calls by removing
the handset from the charging unit is an adjust-
able setting (➔ page 30). If you have switched
this function off, you must press the c button
when you have removed the handset from the
charging unit.
c Press the off-hook key on the handset. You are connect-
ed.