Siemens pocket 2011 Tango - Manual (Page 59)

Operating more than one handset
50
KAP15.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Excluding or reintegrating a handset from/into collective ringing
( t means: browse usingx
, confirm using u )
Selecting a handset for ring priority
( t means: browse usingx
, confirm using u )
Z
OK
.t Service
Call up the "Service" menu item.
# 1 Start the setting procedure.
o Enter the four-digit base code (factory default: "0000")
(➔ page 7).
u : 2 1 The current setting is shown on the display. Handsets
which are in collective ringing mode are indicated by their
internal call numbers and excluded handsets are indicat-
ed by a space:
:
:
o x
Enter the internal call number of the desired handset (1
to 6) and confirm. If the handset is already in collective
ringing mode it is excluded. If it was previously excluded
it is reintegrated into the collective ringing.
REDIAL
(Example 1: handsets1,
2,3,4 are in coll. ringing)
RUF AUS
*21 123 4
SET
REDIAL SET
(Example 2: handset 3 is
not in collective ringing)
RUF AUS
*21 12 4
SET
REDIAL SET
SET
Z
OK
.t Service
Call up the "Service" menu item.
# 1 Start the setting procedure.
o Enter the four-digit base code (factory default: "0000")
(➔ page 7).
u : 2 2 The current setting is shown on the display:
:
o x
Enter the internal call number of the desired handset (1
to 6) and confirm.
REDIAL
(Example: handset 1 has
ring priority)
RUF AUS
*22 1
SET
REDIAL SET
SET