Siemens pocket 2011 Tango - Manual (Page 58)

Operating more than one handset
49
KAP15.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
De-registering a handset from a base station
( t means: browse usingx
, confirm using u )
Ring priority for incoming calls
It is possible to set how incoming calls should be signaled
when operating several handsets. A distinction is made
between:
● Collective call (factory default) – incoming calls are
signaled to all handsets. You can exclude individual
handsets from the collective call and reinclude previ-
ously excluded handsets.
● Ring priority – an incoming external call is first signal-
ed to a prioritized handset. If this party does not ac-
cept the call, the system automatically switches to
"collective call" after an adjustable number of rings.
Switching between collective ringing and ring priority
( t means: browse usingx
, confirm using u )
Z
OK
.t Service Call up the "Service" menu item.
# 7 2 Start the setting procedure.
o Enter the four-digit base code (factory default: "0000")
(➔ page 7). All registered handsets are shown on the dis-
play.
o x
Enter the internal call number of the desired handset (1
to 6) and confirm by pressing x .
SET
SET
Z
OK
.t Service Call up the "Service" menu item.
# 1 Start the setting procedure.
o Enter the four-digit base code (factory default: "0000")
(➔ page 7).
u : 2 3 The current setting is shown on the display
:
1 x Set collective ringing.
or
2 x Set ring priority.
REDIAL.
(Example:1 = collective
ringing is set)
RUF AUS
*23 1
SET
REDIAL SET
SET
SET