Siemens pocket 2011 Tango - Manual (Page 55)

Short cuts
46
KAP14A.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Deleting all entries
You can delete all entries in the short cuts list.
( t means: browse usingx , confirm using u )
Available Memory
You can display the percentage of memory available for
further entries using this function.
( t means: browse usingx , confirm using u )
A message with the requested information, for example
"Memory: 70% available" is displayed.
Starting a short cut
If one or more short cuts have been created, you can se-
lect them and start them when you are both "off-line" and
"on-line" (after pressing the off-hook key).
(
t means: browse usingx
, confirm using u )
The active status is shown on the display until the short
cut is completed. A typical message would read "Short
cut active: deviation".
The display message will only be interrupted if, for exam-
ple, the user is requested to enter the PIN.
Z
OK
.t Short cut
u t Delete Memory W
o You will be requested to enter the PIN (factory default
"0000 ").
x
When you have entered the correct PIN, you can delete
all entries by pressing the display key and return to
an empty short cuts list.
or
x
You can cancel the procedure by pressing the display
key, or by pressing the . menu key.
YES
YES
NO NO
Z
OK
.t Short cut
u t Available Memory W
Z
OK
.t Short cut
x Select the desired short cut from the list and call up the
"Start" menu option.
u t Start
Z
W