Siemens pocket 2011 Tango - Manual (Page 25)

Internal consultation calls and transferring calls
16
KAP08.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Internal consultation calls and transferring calls
During a external call it is possible to:
● hold a consultation call with an internal party,
● transfer the external call to the internal party.
Consultation calls
When more than one handsets are in operation
If more than one handset is in operation (➔ page 52), you
can make a consultation call to an internal party during a
call with an external party. The external party cannot hear
your conversation with the internal party and will hear mu-
sic while on hold.
(
End consultation/continue external call
When a telephone system is in operation
You can make a consultation call to a party in your tele-
phone system during an external call. Please check the
operating instructions for the telephone system.
Consultation calls and call transfer are only pos-
sible if more than one handset is in operation
(➔ page 52).
x
Set up an internal connection.
[
o
Enter the number of the handset which you wish to call
(1 to 6). You will hear the internal ring tone. The handset
is being called. The external call is held.
R End the internal consultation call. You are now reconnect-
ed to the external party.
R Set up a consultation call. You will hear the dial tone. The
external call is held.
o Enter the desired extension number. The relevant party is
called.
R End the internal consultation call. You will be reconnected
with the external party.