Siemens pocket 2011 Tango - Manual (Page 48)

Lock functions on the handset
39
KAP14.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B306-2-7619
Lock functions on the handset
It is possible to lock both the entire Gigaset 2011 Tango
telephone and individual handsets against unauthorized
use. Depending on the type of lock you select, DSS or
emergency numbers can still be called from the handset.
Activating/deactivating the handset lock
You can lock your handset for outgoing external calls to
protect it against unauthorized use.
It is possible to accept calls on a locked handset.
( t means: browse usingx
, confirm using u )
DSS number for handset lock
You can store one DSS number which can be dialed when
the handset is locked. The DSS number can be a number
where you can be reached in your absence.
Z
OK
.t Handset Lock
t Lock on/off
When you select the handset lock you will be requested
to enter your PIN.
o
x Enter the PIN (factory default "0000 ") and confirm.
u
/
x Switch the handset lock on or off by pressing the /
key and save.
The message "Handset locked" is shown on the display.
If you have already entered a DSS number, this will be dis-
played.
or
x
Quit the menu without implementing any changes.
OK
ON OFF OK OFF
ON
{
The DSS number must not be the same as a
barred number.
The DSS number cannot be dialed from a locked
handset,
● if "outward-restricted trunk access" is set
(➔ page 38), or
● if the Gigaset 2011 Tango lock is activated
➔
page 33.
If the Gigaset 2011 Tango lock is activated, it is
only possible to dial emergency numbers.
Exception: DSS number = emergency number.