Siemens pocket 2011 Tango - Manual (Page 63)

Operating in a telephone system
54
KAP16.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Entering the analog trunk and the MSI
The analog trunk and MSI have one to three characters
and can comprise the digits @ to 6 and the : , # ,
and R keys.
( t means: scroll using x
, accept using u )
Modify the pause length according to the analog trunk/MSI
( t means: browse using x
, confirm using u )
Z
OK
.t Service
Call up the "Service" menu item.
#@ Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 58).
u
Select the analog trunk.
or
u u
Select the MSI.
o
Enter the analog trunk or the MSI. If more than one ana-
log trunk or MSI is available, you can enter the next analog
trunk/MSI by pressing u .
x Store setting.
REDIAL
REDIAL REDIAL
REDIAL
SET
Z
OK
.t Service
Call up the "Service" menu item.
#1 Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 58).
u @24x
Select pause length of 1 second.
or
u @2%x
Select pause length of 2 seconds.
or
u @2@x
Select pause length of 3 seconds (factory default).
or
u @21x
Select pause length of 6 seconds.
REDIAL SET
REDIAL SET
REDIAL SET
REDIAL SET