Siemens pocket 2011 Tango - Manual (Page 47)

The Gigaset 2011 Tango lock functions
38
KAP13.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Setting trunk access for the handsets
You can define for each registered handset whether exter-
nal calls can be made from it or not. A distinction is made
between:
● Unrestricted trunk access (factory default) – exter-
nal calls allowed, and
● Outward restricted trunk access (authorization for
incoming calls) – external calls cannot be made but in-
coming calls can be accepted.
( t means: browse usingx
, confirm using u ) Z OK
.t Service Call up the "Service" menu item.
# 1 Start the setting procedure.
o
Enter the four-digit system code (factory default "0000")
(➔ page 7).
u : 1 Prepare to select the desired handset.
o
Enter the handset internal call number (1 to 6). The cur-
rent status of the selected handset is shown on the dis-
play:
:
1 x Set "Unrestricted trunk access".
or
@ x "Outward restricted trunk access".
REDIAL
(Example: handset 2 =1 =
unrestricted trunk access)
RUF AUS
*12 1
SET
REDIAL. SET
SET
SET