Siemens pocket 2011 Tango - Manual (Page 66)

Operation at more than one base station
57
KAP17.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Base station names
You can change the preset base station names ("Base 1",
"Base 2" ... "Base 6"). In a company, one station can be
called "Purchasing", for example, and another "Stock".
(
t means: browse usingx , confirm using u )
Activate "Change Base Name" in the additional menu.
The input function is active (➔ page 22).
If you change a name, save it with "Save Name".
You can exit the relevant menu levels at any time without
making any changes by pressing .
De-registering a base station
This menu option is for de-registering the handset if the
base station is no longer available, i.e. if it is defective or
at a remote location.
Activate "De-register" in the additional menu.
Z
OK
.t Settings t Base Settings
x
Select the base station you want to rename.
Z
u t Change Base Name W
u t Save Name W
The menu item "ISDN Config." does not apply
to Gigaset 2011 Tango.
{
.t Settings t Base Settings
x
Select the base station you want to de-register. Z
u t De-register Base W
With this function, the registration data is only
deleted in the handset.
To ensure that your handset is de-registered at
the base station, the de-registration must be
performed at your base station (➔ page 49).