Siemens pocket 2011 Tango - Manual (Page 36)

Base station settings
27
KAP09.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Setting the base station ringer tone
It is possible to define the tone used to signal calls at the
base station. You can choose from a range of six tones.
The factory default is level 1.
( t means: browse usingx , confirm using u )
To set the ringer tone, the base station ringer
must be switched on.
The ringer tone can also be set for the handset
(➔ page 29).
Z
OK
.t Service
Call up the "Service" menu item.
#:6 Start setting procedure. The selected ringer tone is
sounded. The set tone level is indicated on the display:
:
o
x Enter the applicable digit for the required ringer tone (1 to
6) and save.
(Example: tone level 1 is
set)
RUF AUS
*6 1
SET
REDIAL SET
SET