Siemens pocket 2011 Tango - Manual (Page 35)

Base station settings
26
KAP09.FM5 18.7.99 Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Base station settings
You can program your Gigaset 2011 Tango to suit your own
individual requirements. The settings are made from a
registered handset.
Service function
Base station settings are introduced using the "Service"
menu function.
( t means: browse using x
, confirm using u )
Switching the base station ringer off and setting the ringer volume
It is possible to define whether the ringers should be sig-
naled on the base station or only on the handset. You can
set the ringer volume for the ringer on the base station.
There are seven volume levels available:
The factory default is level 6 (loud).
( t means: browse using x , confirm using u )
Z OK
.t Service
Level 0 = Switch off base station ringer.
Calls will only be signaled on the
handset.
Level 1 ... Level 6 = Ringer volume low ... loud
It is also possible to set the ringer volume on the
handset (➔ page 29).
Z
OK
.t Service
Call up "Service" menu item.
#:% Start setting procedure. The ringer setting is sounded.
The set volume is indicated on the display:
:
o
x Press the digit for the desired volume (1 to 6) or 0 to
switch the ringer off and store setting.
(Example: ringer volume 6
is set)
RUF AUS
*5 6
SET
REDIAL SET
SET