Savin 2045 - Manual (Page 77)

Viewing a List of Stored Files
71
6
Delivering or Sending Stored
Files
Files stored in the Document Server
can be delivered to the delivery serv-
er or sent as e-mail.
Note
❒ This section explains how to select
files to be delivered or sent. For
more information about the deliv-
ery procedure, see p.53 “Delivery
Procedure”. For more information
about sending by e-mail, see p.41
“Procedure for Sending E-mail”.
❒ When stored files are delivered or
sent, basic settings cannot be
made. The files are delivered or
sent with the basic settings speci-
fied when they were stored in the
Document Server.
AAAA
Display the list of stored files by
pressing [Select Stored File].
Reference
See p.66 “Viewing a List of
Stored Files”.
BBBB
Select a file to be delivered or
sent.
Note
❒ When you select a password
protected file, the Password
screen appears. After you have
entered the correct password
and pressed [OK], the file will be
selected.
CCCC
To select multiple files, repeat
step
BBBB .
Note
❒ You can select up to 30 files for
one operation.
❒ If you select multiple files, the
files will be delivered or sent in
the order they were selected.
❒ If you press [Display Selection],
the selected files will be shown
in the order of delivery.
DDDD
Press [OK].
The screen for specifying a destina-
tion appears.
EEEE
Switch the Destination List as
necessary.
FFFF
Specify a destination.
GGGG
If required, select the sender (scan
data delivery source) and a sub-
ject.
HHHH
Press the
{{{{Start}}}} key.