Delivering stored scan data, Delivery procedure, P.53 “delivery procedure – Savin 2045 User Manual
Page 59: 5delivering stored scan data
Delivering Stored Scan Data
53
5
Delivering Stored Scan Data
Delivery Procedure
Data is delivered after scan settings
and destination are specified. If nec-
essary, you can select a sender and a
subject.
AAAA
Press the
{{{{Scanner}}}} key.
BBBB
If user codes are set, enter a user
code with the number keys, and
then press the
{{{{#}}}} key.
The Scanner Function screen ap-
pears.
Reference
For information about the user
c odes, see Gene ral Settings
Guide.
Note
❒ If the Network TWAIN Scanner
screen appears, press [Cancel].
CCCC
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the
{{{{Clear Modes}}}} key.
DDDD
Place the original in the machine,
and then adjust the settings for
original size and orientation if re-
quired.
Reference
EEEE
If the E-mail screen appears,
switch to the screen for network
delivery scanner.
A Press [ ].
B Press [Switch Destination List].
C Press [Delivery Server].
D Press [Exit].
The Network Delivery Scanner
screen appears.
FFFF
Select the destination.
Four methods are available for
specifying a destination: selecting
it from the list, specifying a short
ID num ber, selecting it after
searching for it, or directly typing
the e-mail address.
Note
❒ When using ScanRouter V2
Lite/Professional , the desti-
nation list is updated automati-
cally.
ZHSS020E