Savin 2045 User Manual
Page 44
Setting Originals
38
3
AAAA
Select [On] in [Job Reset Time in Add-
ing Original]
, and then specify a job
reset time in seconds.
Reference
p.18 “Job Reset Time in Adding
Original”
BBBB
Place the originals.
Reference
CCCC
Make settings for scanning area
and original orientation.
Reference
p.35 “Original Orientation and
Scan Area”
Note
❒ When placing originals on the
exposure glass, if [On] is select-
ed in [Job Reset Time in Adding
Original]
, it is not necessary to se-
lect SADF or Batch.
DDDD
Make settings for delivering,
sending by e-mail, or storing.
Reference
p.53 “Delivery Procedure”
p.41 “Procedure for Sending E-
mail”
p.62 “Storage Procedure”
When the
{{{{Start}}}} key is pressed,
the originals are scanned.
After the originals are scanned, the
remaining time for accepting the
next original is displayed.
EEEE
If you want to change the basic
settings, the scanning area, or the
original orientation, change the
settings before placing the next
original.
Note
❒ While settings are being changed,
the countdown until originals are
no longer accepted stops.
FFFF
When there are other originals to
scan, place them within the speci-
fied time.
When placed, the originals are fed
and scanned automatically.
GGGG
Repeat from step
FFFF until all origi-
nals are scanned.
HHHH
If there are no more originals,
press the
{{{{#}}}} key.
Note
❒ Originals are scanned in order.
Place them from the first page.
❒ Press the {{{{Start}}}} key if you want
to restart before the countdown
stops.
❒ When [SADF] is selected and
originals are being scanned by
dividing them and scanning
them consecutively using the
ADF, the next original to be
added can be placed on the ex-
posure glass to be scanned. In
this case, the
{{{{Start}}}} key must be
pressed to begin scanning.