Simultaneous delivery and storage – Savin 2045 User Manual
Page 65
Delivering Stored Scan Data
59
5
C Enter the subject.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
D Press [OK] twice.
JJJJ
Press the
{{{{Start}}}} key.
Note
❒ To interrupt scanning, press the
{{{{Clear/Stop}}}} key or [Stop] in the
displayed screen.
❒ When using the SADF or Batch
function, place the next original
a fter the ot hers have been
scanned. See p.37 “Scanning
Originals in Several Times”.
Simultaneous Delivery and
Storage
You can use the network delivery
scanner function with the Document
Server.
Scanned data is stored in the Docu-
ment Server at the same time the data
is delivered.
Note
❒ This section explains mainly the
operation for simultaneous deliv-
ery and storage. For more informa-
tion, see p.53 “Delivering Stored
Scan Data”.
AAAA
Place the original, and then adjust
the settings for original size and
orientation if required.
Reference
BBBB
Make the basic settings.
CCCC
Select the destination.
DDDD
If required, specify the sender
(scan data delivery source) and a
subject.
EEEE
Press [Store File].
FFFF
Make sure [Send & Store] is select-
ed.
GGGG
Press [File Information] to set file in-
formation.
Reference
p.64 “Specifying file informa-
tion”
HHHH
Press [OK] twice.
IIII
Press the
{{{{Start}}}} key.