Savin 2045 - Manual (Page 14)

Network Scanner
8
1
9. Status indicators
Show the status of the selected function.
• When lit yellow, the corresponding
function is selected.
• When lit green, the corresponding
function is active.
• When lit red, the corresponding func-
tion is interrupted. Press the respec-
t i v e k e y , a n d t h e n f o l l o w t h e
instructions that appear on the screen.
10. Function keys
Press the {{{{Copy}}}}, {{{{Document Server}}}}, {{{{Fac-
simile
}}}}, {{{{Printer}}}}, or {{{{Scanner}}}} key to acti-
vate the respective function. The display
content changes accordingly.
The indicator for the selected function
lights up.
11. Number keys
Use to enter numeric values.
12. {{{{#}}}} key (Enter key)
Use to enter a numeric value.
13. {{{{Clear/Stop}}}} key
• Clear: Clears an entered numeric val-
ue
• Stop: Stops scanning
14. {{{{Start}}}} key
Use to begin scanning, file storing, or de-
livery.
Display Contents
The normal screen configuration is as follows.
The display's contents differ depending on the function.
Note
❒ The Copy screen is set as the default screen when the machine is turned on.
You can change this setting in the System Settings. See General Settings Guide.
Using as a network TWAIN scanner
When using the machine as a network TWAIN scanner, it is not necessary to
press the
{{{{Scanner}}}} key on the control panel. When the TWAIN driver becomes
active on a client computer, the display automatically switches to the following
screen.
Press [Cancel] to use functions other than the network TWAIN scanner function.