Savin 2045 User Manual

Page 42

Setting Originals

One-sided original/Two-sided
original selection

A When scanning one-sided orig-

inals, make sure that [2 Sided
Original]

is not selected.

B When scanning two-sided orig-

inals, press [2 Sided Original] to
select [2 Sided Orig.: T to T] or [2
Sided Orig.: T to B]

according to

the binding orientation of the
original.

Note

❒ When the last page of two-

sided originals is blank, se-
lect [1 Side] to skip that side
and finish scanning, or select
[2 Sides]

to scan that side as a

blank page.

❒ If [1 Side] is selected for the last

page when scanning originals
in several batches, the maxi-
mum number of pages per file
may decrease depending on
the number of batches set.

❒ If [1 Side] is selected for the

last page, the image size
might become larger than
original and may exceed the
maximum e-mail size possi-
ble. In this case, change the
settings of [Max. E-mail Size] in
scanner settings. See p.11
“Initial Scanner Setup”.

❒ When scanning originals on

the exposure glass with the [2
Sided Original]

setting, set [1 Sid-

ed Original]

for the last original.

Orientation selection

A Press the key for the same ori-

entation as the actual orienta-
tion of the original or .

Reference

p.31 “Specifying Original
Orientation and Setting Orig-
inals”

SADF/Batch selection

A When scanning a large number

of originals using the ADF by
dividing the originals and
scanning them individually or
in batches, check that [SADF] or
[Batch]

is selected.

Note

❒ Select [SADF] for adding orig-

inals one by one, or select
[Batch]

for adding the origi-

nals in batches.

❒ Select whether [SADF] or [Batch]

is displayed using the initial
scanner setting [Switch to Batch].

Mixed size selection

A When originals of different

sizes are placed, make sure that
[Mixed Size]

is selected.

Note

❒ If [Mixed Size] is not selected,

the maximum size detected
is set as the scan size. For
originals smaller than this
size, a blank space will ap-
pear in the resulting image.

Top to top
original:

Top to bot-
tom original:

R S