Savin 2045 User Manual

Page 51

Procedure for Sending E-mail

❒ To prevent misuse of a sender

name, we recommend you set
up a password for that sender
name.

❒ Be sure to select or enter a send-

er name. Otherwise [Key Opera-
tor's E-mail Address]

is used as the

sender name. See General Set-
tings Guide.

When selecting a sender from the
list

A Press [Attach Sender's Name].

B Select the sender.

Note

❒ If a password has been set, a

screen for entering the pass-
word appears after selecting
the sender. Enter the pass-
word, and then press [OK].
After verification of the pass-
word, the sender name is dis-
played.

C For a reception confirmation e-

mail, press [Return Receipt].

Note

❒ When [Return Receipt] is se-

lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the setting in
[Return Receipt]

becomes

invalid.

D Press [OK].

Using a short ID number to
specify a sender name

A Press [Attach Sender's Name].

B Use the number keys to enter

the five-digit short ID number
that has been assigned to a
sender.
If the entered number is less
than five digits long, press the

{{{{#}}}} key after the last number.
Example: To enter 00006
Press the

{{{{6}}}} key, and then the

{{{{#}}}} key.