Sharp UX-B800 User Manual
Page 52
Option Settings
50
TRANSACTION
LIST
This sets the condition for printing transaction reports (see page
56). Press a number key as follows:
(ALWAYS PRINT): Print after every fax transmission,
reception and error.
(ERROR/MEMORY): Print only after an error or memory
operation.
(SEND ONLY): Print after every fax transmission.
(ERROR ONLY): Print only when an error occurs.
(NEVER PRINT): Never print.
Initial setting: ERROR ONLY
PSEUDO RING
DURATION
This sets the duration of the special ringing sound that alerts you
to voice calls and manually dialled faxes in TEL/FAX reception
mode. Press a number key as follows:
15 seconds
30 seconds
60 seconds
120 seconds
Initial setting: 15 seconds
FLASH
SELECT
This setting is used when the machine is connected to a PBX and
the PBX uses the “Flash” method to connect to an outside line.
Press
(SHORT TIME) if your PBX line is a normal line, or
(LONG TIME) if your PBX is a high-speed line.
Note: This setting is normally only used in Germany. In other
countries, you can try changing the setting if you encounter
difficulty with the default setting.
all.book Page 50 Thursday, August 10, 2006 2:22 PM