Sharp UX-B800 - Manual (Page 30)

Sending a Fax: Normal Dialling
28
1 Load the document(s).
•
The resolution/contrast cannot be
adjusted unless the document is
loaded.
2 Press one or more times
until the desired resolution and
contrast settings appear in the
display.
•
The first time you move through the
list of resolution settings, the contrast
setting AUTO will appear next to
each resolution setting. The second
time you move through the list, the
contrast setting DARK will appear.
Note: In order to transmit in SUPER
FINE resolution, the receiving machine
must also have that resolution. If not,
your machine will automatically step
down to FINE.
RESOLUTION/
RECEPTION MODE
If you prefer to use FINE for the
default resolution setting, change the
“FINE PRIORITY” setting (p. 49).
Sending a Fax: Normal Dialling
With Normal Dialling, you pick up the
handset (or press ) and dial by
pressing the number keys.
♦
If a person answers, you can talk with
them through the handset before
sending the fax.
SPEAKER
♦
Normal Dialling allows you to listen to
the line and make sure the other fax
machine is responding.
1 Load the document(s).
•
If desired, press to set the
resolution and/or contrast.
2 Pick up the handset or press .
Listen for the dial tone.
3 Dial the fax number of the receiving
machine (press the number keys).
•
If you are on a Flash-type PBX and
are dialling out, press , wait for
the connection to the outside line,
and then dial the number.
4 Wait for the connection. You will
either hear a fax tone or the other
person will answer.
•
If the other person answers, ask
them to press their Start key (if you
pressed , pick up the handset
to speak with them). The receiving
machine will issue a fax tone.
5 When you hear the fax tone, press
. Replace the handset.
•
If the transmission is completed
successfully, the machine will beep
once.
RESOLUTION/
RECEPTION MODE
SPEAKER
R
SPEAKER
all.book Page 28 Thursday, August 10, 2006 2:22 PM