Sharp UX-B800 User Manual
Page 29
Resolution and Contrast
27
3. Sending
Fa
x
e
s
Resolution and Contrast
2
Place the document face down with
the top edge going in first, and
insert it all the way into the feeder.
Make sure that the roller draws the
document in.
•
Display: [
READY TO SEND
] .
3
Adjust the resolution and/or contrast
settings (p. 27), and then dial the
receiving machine (p. 28).
Removing a document from the
feeder
1
Open the cover (
➊) and remove the
document (
➋).
•
Caution: Attempting to remove a
document without opening the cover
may damage the feeder mechanism.
You can adjust the resolution and
contrast before sending a document.
♦
The default resolution setting is
STANDARD. The default contrast
setting is AUTO.
♦
Adjust the settings each time you
don't want to use the default settings.
Note: The resolution and contrast
settings are only effective for sending;
not for receiving.
Resolution settings
Contrast settings
STANDARD
Use STANDARD for
ordinary documents.
This provides the fastest
transmission.
FINE
Use FINE for documents
containing small letters
or fine drawings.
SUPER FINE Use SUPER FINE for
documents containing
very small letters or very
fine drawings.
HALF TONE Use HALF TONE for
photographs and
illustrations. The original
will be reproduced in 64
shades of gray.
AUTO
Use AUTO for normal
documents.
DARK
Use DARK for faint
documents.
1
2
2
Close the cover, pressing down
firmly on both front corners.
all.book Page 27 Thursday, August 10, 2006 2:22 PM