Sharp UX-B800 - Manual (Page 14)

Connecting the Phone Line
12
In this example, “15” is
closest to a straight line.
The machine is initially set to print
high quality images, which require
more ink. If you prefer to use less ink
and speed up drying time, change the
“INK SAVE MODE” setting to “ON”
(pp. 49 and 53).
Connecting the Phone Line
If you selected " NEW ", the machine
will print an alignment page.
Continue with the steps below.
8 In the alignment page, locate the
line that is closest to a straight line.
9 Enter the number of the straightest
line with the number keys.
•
To clear a mistake, press .
10 Press .
When the resolution is set to HALF
TONE, the machine is initially set to
print at a slower printing speed to
enable higher quality images. When
using HALF TONE, if you prefer faster
printing at the expense of slightly
reduced image quality, change the
“QUALITY MODE” setting to “NO” (pp.
49 and 53).
TEL.
LINE
TEL.
SET
TEL. LINE
socket
Standard wall socket
Insert one end of the line cord into the
socket on the back of the machine
marked TEL. LINE. Insert the other end
into a wall telephone socket.
Extension phone (optional)
If desired, you can connect an
extension phone to the machine.
Remove the seal covering the TEL.
SET socket and connect the extension
phone line to the socket using the
provided adapter.
♦
Eire: Insert the extension phone line
directly into the TEL. SET socket (do
not use the adapter).
TEL.
LINE
TEL.
SET
all.book Page 12 Thursday, August 10, 2006 2:22 PM