Sharp UX-B800 - Manual (Page 43)

Caller ID (Requires Service)
41
6. Special Fun
c
tions
programmed. Clear one of the keys
and then store a group.
4 Press the Group Key that you want
to use ( or ). (If you are
clearing a Group Key, press the
Group key that you want to clear
and go to Step 8.)
•
If [ALREADY STORED] or [RAPID #
STORED] appears, the key has
already been programmed. Clear the
key or try the other Group Key.
5 Select a destination using one of the
following methods:
•
Press a Rapid Key.
•
Press and enter a 2-digit
Speed Dial number.
•
Press or until the
desired destination appears in the
display.
•
Press , , or
(only for an e-mail
destination).
6 Press to enter the destination.
7 Repeat Steps 5 and 6 for each of
the other desired destinations
(maximum of 20).
•
You can press to scroll through
and check your entered destinations.
To delete a destination, press
when it appears.
33/G1 34/G2
SPEED DIAL
8 When you have finished entering
the destinations, press .
9 Press to exit.
STOP
Important: To use this function, you
must subscribe to a Caller ID service
from your phone company. The
machine may not be compatible with
some Caller ID services.
Caller ID (Requires Service)
If you subscribe to a Caller ID service,
you can have the machine show the
name and number of the caller when
you receive a call.
1 Press , then until
[ OPTION SETTING] appears .
2 Press , then until
[ CALLER-ID] appears.
3 Press (YES) to turn on Caller
ID. (To turn off Caller ID, press
and go to Step 7.)
4 Press to exit.
FUNCTION
STOP
all.book Page 41 Thursday, August 10, 2006 2:22 PM