Sharp UX-B800 - Manual (Page 39)

Reception to Memory
37
4. Receiv
ing
Fa
x
e
s
Incoming faxes will be received to
memory when printing is not possible,
such as when the machine runs out of
paper, the print cartridge needs
replacement, or the paper jams.
When you have received a fax in
memory, [FAX RX IN MEMORY] will
appear in the display, alternating with a
message that indicates the problem.
When you resolve the problem, the
stored faxes will automatically print out.
♦
If you received faxes to memory
because the machine ran out of
paper, be sure to add paper that is
the same size as the paper
previously used, or the fax print-out
size will not match the size of the
printing paper.
Reception to Memory
Memory capacity
When Secure Receive is activated (p.
46), the number of pages that can be
held in memory is approximately 100.
The pages will be retained in memory
even if the power is turned off or a
power failure occurs.
When Secure Receive is not activated,
the number of pages that can be held
in memory is approximately 250.
Caution: When Secure Receive is not
activated, any faxes held in memory
will be erased if the power is turned off
or a power failure occurs.
♦
If faxes held in memory are erased, a
CLEAR REPORT will print when the
power is restored. This provides
information about the erased faxes,
including the fax numbers of the
transmitting machines if available.
Note: If 100 pages or more are stored
in memory (the display shows 40% or
higher memory use when is
pressed), fax and e-mail transmission
may not be possible. Transmission will
be possible after the faxes in memory
are printed out.
all.book Page 37 Thursday, August 10, 2006 2:22 PM