Sharp UX-B800 - Manual (Page 34)

Sending a Fax: Auto Dialling
32
•
Speed Dialling: If the number is
stored in a Speed Dial number, press
and enter the Speed Dial
number with the number keys. Make
sure the correct destination appears
in the display (if not, press ), and
then press .
•
Search Dialling: Press or
until the name or number of
the other party appears in the
display, and press .
3 Dialling and transmission will take
place automatically.
•
To cancel transmission, press .
•
If the transmission is completed
successfully, the machine will beep
once.
•
If an error occurs, the machine will
beep three times and print a
Transaction Report to inform you of
the problem (p. 56).
SPEED DIAL
STOP
STOP
Making a voice call with an auto-dial
number
Rapid Key Dialling: Lift the handset
and press the Rapid Key.
Speed Dialling: Lift the handset, press
, and enter the 2-digit Speed Dial
number with the number keys.
Search Dialling: Press or
until the name or number of the other
party appears, and lift the handset.
(You can also lift the handset first,
search for the number, and then press
.)
Sending a fax by Direct Keypad
Dialling
Use this method to dial a full fax
number without using the handset .
1 Load the document(s).
•
If desired, press to set the
resolution and/or contrast.
2 Enter the number of the receiving
machine with the number keys.
•
If a pause is required between any of
the digits to access a special service
or an outside line, press . The
pause will appear as a hyphen (two
seconds per pause). Several pauses
can be entered in a row.
SPEED DIAL
RESOLUTION/
RECEPTION MODE
FUNCTION
all.book Page 32 Thursday, August 10, 2006 2:22 PM